Irwin Hilmor Pipe Benders Advice.

[solarsavings]

Some say these were the UK manufacturers of Hilmor benders.

 

[Deleted member 26818]

These green ones are a bit cheaper:
Conduit Bender | ElectricalDirect - https://www.electricaldirect.co.uk/product/conduit-bender-851378

 

[RDB85]

Might put a bid on this: Used HILMOR EL25 SHORTIE Pipe Conduit Pipe Bender Stand with Vice Clamp | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F183688345022

Anything I need that’s not listed?

 

[telectrix]

Might put a bid on this: Used HILMOR EL25 SHORTIE Pipe Conduit Pipe Bender Stand with Vice Clamp | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F183688345022

Anything I need that’s not listed?

looks good to me. just buy a tin of smooth hammerite cover up that banana colour.the shorty is a good unit, not too heavy to carry.

 

[7029 dave]

Not much good without the vice.

 

[casperLennon]

The vice is there

 

[Rpa07]

Might put a bid on this: Used HILMOR EL25 SHORTIE Pipe Conduit Pipe Bender Stand with Vice Clamp | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F183688345022

Anything I need that’s not listed?

It hasn’t got a pipe (tube) stop which will cost £27.30 as you’ll not find a second hand one. I was gutted having to spend £27.30 on a cast piece of aluminium but without it - you’ll not bend a tune! or a tube.

 

[RDB85]

It hasn’t got a pipe (tube) stop which will cost £27.30 as you’ll not find a second hand one. I was gutted having to spend £27.30 on a cast piece of aluminium but without it - you’ll not bend a tune! or a tube.

Thanks I’ve seen some parts on here: Spare Parts for Hilmor EL25 Electric Conduit Bending Machine - Edwardes - https://www.edwardes.co.uk/en/categories/conduit-bender-spares-for-deg---hilmor

 

[RDB85]

Found a used one here if that’s correct: Tube stop | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F233135927288

 

[Deleted member 26818]

I slowly assembled mine from various sites I’ve worked on.
The stop was the first thing I obtained.

 

[Rpa07]

Found a used one here if that’s correct: Tube stop | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F233135927288

That’s the one, grab it if you win the auction. And don’t lose it on site OR let Spin anywhere near it!

I slowly assembled mine from various sites I’ve worked on.
The stop was the first thing I obtained.

Spin, I thought more of you! How big was your bag when you were ‘taking’ the frame off site!

 

[Deleted member 26818]

It’s surprising just how much you can fit into those Stanley Fat Max rucksacks.

 

[RDB85]

Didn’t win it. I will just have to keep an eye out or get a new one.