main switch question

[Deleted member 26818]

There is no requirement for RCD protection of socket circuits, unless the installation is considered a special location.
Just wondering whether the meter is single or 3 phase?

 

[shanky887614]

yes there is if its under 20amp supply. ill dig reg out of byb later

 

[Deleted member 26818]

yes there is if its under 20amp supply. ill dig reg out of byb later

Good luck with that.

 

[shanky887614]

Good luck with that.

 

[Deleted member 26818]

Thanks for that, as you can see from what you have quoted, there is no requirement for the circuit to be provided with RCD protection.

Socket-outlets are required to be provided with RCD protection, not the circuits supplying them, except in some instances where the installation is considered to be a special location, such as Horticultural or Agricultural.
In fact providing RCD protection for such circuits could be a non-compliance in some circumstances.

 

[shanky887614]

Socket-outlets are required to be provided with RCD protection, not the circuits supplying them, except in some instances where the installation is considered to be a special location, such as Horticultural or Agricultural.
In fact providing RCD protection for such circuits could be a non-compliance in some circumstances.

if the cable is not more than 50mm in wall or has mechanical protection then it needs an rcd

 

[Anthony S]

Exceptions still exist with a risk assessment

 

[shanky887614]

Exceptions still exist with a risk assessment

unless its a dwelling then no you cant skip it

 

[Anthony S]

unless its a dwelling then no you cant skip it

Who mentioned a dwelling ?

 

[Deleted member 26818]

if the cable is not more than 50mm in wall or has mechanical protection then it needs an rcd

Still no requirement for socket circuits to be provided with RCD protection.
Yes there are circumstances where it may be advisable, or the simplest solution to provide RCD protection for such a circuit.
However it still remains that there is no requirement in BS7671 for such circuits to be provided with RCD protection, except in some circumstances where the installation is considered to be a special location.
Doesn't matter whether there is a dwelling involved or not.