- Reaction score
- 1
Hi all,
I'm wondering if someone can answer this question concerning a wiring scenario. I recently saw on a youtube video - a guy create a scheme where the power source first went into a light then went to the light switch. Is this safe for series of 6 wafer lights (6 in.) 75W 1140 lumens using 14-2 on a 15 amp breaker?
(6 x Halo canless downlights - slim edge HLBPH6099FS1EMWR)
The reason that I may want this configuration is because the wiring directly to the switch from a wall receptacle (live power source) calls for a little more effort.
I would remember clearly to mark the white wire with Black tape, if presumed safe by someone that knows more than me.
If interested see video
At time stamp 02:15
I imagine this would be safe with 2 million followers, but I'm wondering about contingencies or unforeseen problems.
Thx.
Noob
I'm wondering if someone can answer this question concerning a wiring scenario. I recently saw on a youtube video - a guy create a scheme where the power source first went into a light then went to the light switch. Is this safe for series of 6 wafer lights (6 in.) 75W 1140 lumens using 14-2 on a 15 amp breaker?
(6 x Halo canless downlights - slim edge HLBPH6099FS1EMWR)
The reason that I may want this configuration is because the wiring directly to the switch from a wall receptacle (live power source) calls for a little more effort.
I would remember clearly to mark the white wire with Black tape, if presumed safe by someone that knows more than me.
If interested see video
At time stamp 02:15
I imagine this would be safe with 2 million followers, but I'm wondering about contingencies or unforeseen problems.
Thx.
Noob