- Thread starter sman26
- Start date
-
- Tags
- led lighting transformer
Discuss Undercabinet Lighting Transformer to LED in the DIY Electrical Advice area at ElectriciansForums.net
Share this page
I believe I found what I need to do. I have a 12VAC transformer bringing 110V down to 12V AC. I need it to be 12V DC for LEDs. I have talked to some LED companies and at the end of the wire, before I begin my LED strips, I need to add a LED AC/DC Diode Bridge which converts the AC to DC. After that I should be good.
Sound good to you guys?
Reply to Undercabinet Lighting Transformer to LED in the DIY Electrical Advice area at ElectriciansForums.net
Share this page
Similar Threads
Hi all,
Great forum with lots of advice read and greatly received over the years!
I have a question here that I am hopeful somebody here can...
I installed a transformer for 5 smart thermostats, 1 of the thermostats trips the transformer fuse button right when I turn on the power. There is...
Hi all,
No electronic knowledge here. The plug/transformer of a led lightstring is fried.
Now I am trying to find a replacement on Aliexpress...
I have 2 lights connected to 1 switch. I installed a led light fixture on one light, it had one red wire and one black wires. It was easy to match...
I have three Aurora Fluorescent linkable (linked) under cabinet 'strip' lights (c.21cm each) under the kitchen cabinets and over the sink area...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.