Discuss Advice on designing an electrostatic-proof building please. in the UK Electrical Forum area at ElectriciansForums.net

Fun fact (well, not for him) is that Bobby Farrell died in St. Petersburg on the anniversary of Grigori Rasputin's death.

Oh those Russians...
 
Fun fact (well, not for him) is that Bobby Farrell died in St. Petersburg on the anniversary of Grigori Rasputin's death.

Oh those Russians...

Always a source of good information this forum.
 
OK, that's enough reminiscing :). I'm ordering trunking to use as dado rail today.

Unitrunk looked excellent, until I looked at the price: 100 x 50 x 3m is £193! I though it was a typo.

Very similar Tamlex 100 x 50 x 3m from CEF is £24.17.

I'd have to cut my own holes in the Tamlex, but for an overall saving of £1,012 (!) I think I'll get the jig saw out
 
Unitrunk looked excellent, until I looked at the price: 100 x 50 x 3m is £193! I though it was a typo.
That is the list price. Most electrical trade places will give you discounts of the order of 70-90% on that if you ask the right folk.
[automerge]1596528738[/automerge]
If your company are doing a lot of this sort of work (internally, not as electrician services, etc) it might be in your interests to apply for a trade account with one or two of the local wholesalers.
[automerge]1596528945[/automerge]
Is the trunking just for a set of 13A sockets? you might find it easier to use the likes of these and glands/Flexishield between them:
 
Last edited:
If you have explosive material or potential to become explosive then you’ll first need to follow Hazard area classification depending on what chemical or potentially explosive Material you are using. Normally cabling would Have to be intrinsically safe ie the use of shunt diodes or enclosures would have to be EX rated depending on the application. EX D is flameproof, EX P is pressurisation of an enclosure. EX E is extra protection and so on. Zoning is generally 0,1 and 2 and that basically goes on your LRL & URL limits.
 
If you have explosive material or potential to become explosive then you’ll first need to follow Hazard area classification depending on what chemical or potentially explosive Material you are using. Normally cabling would Have to be intrinsically safe ie the use of shunt diodes or enclosures would have to be EX rated depending on the application. EX D is flameproof, EX P is pressurisation of an enclosure. EX E is extra protection and so on. Zoning is generally 0,1 and 2 and that basically goes on your LRL & URL limits.

Thanks for the ideas, but those regs are for explosive atmospheres, as often found in chem plants, or offshore. It has nothing to do with explosive substances. It's a very frequent confusion, especially among regulators.

Think about it - a sparky switch would definitely ignite a gas/air mixture permeating the whole area, but the same sparky switch would not jump across a room and set off a pile of nitrocellulose propellant sitting on a lab bench. It's only static protection which is important to consider in the latter case.
[automerge]1596533604[/automerge]
That is the list price. Most electrical trade places will give you discounts of the order of 70-90% ...

Yeah, it's stupid isn't it? Like arguing with Travis Perkins. We do have trade accounts and I'm good at getting best prices, but not many places advertise the Unitrunk stuff, so it's perhaps too much effort.

Update: I just checked, it appears Unitrunk only sell direct from their own places, and there's no central tel number, only published (massive) list prices and an email form. They appear to be one of those companies which makes it hard to buy from them. Marketing people call this having a 'customer prevention department' :rolleyes: I can't be bothered! cf. Two clicks on CEF and Tamlex product can arrive tomorrow ...

Is the trunking just for a set of 13A sockets? ...
No, it's for power, data, telelphone and a DC lab supply as well. Hence the flexibility of using trunking.
 
Last edited:

Reply to Advice on designing an electrostatic-proof building please. in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi Have done some additions to an existing multibuilding non domestic site. I noticed no SPD on the mains intake side, they are in a reasonably...
Replies
13
Views
2K
Hi sorry very long one. Please hop to bottom paragraph for short version. I’m just about to refurb bathroom in my 1986 house but bonding always...
Replies
36
Views
8K
Hopefully someone wiser than me can help explain some odd measurements I’ve taken at my own home. This is a long read, I’ve tried to give as much...
Replies
21
Views
4K
This is my first posting here - I am not an electrician so please bear with me. I am trying to establish the best method to provide earthing of a...
Replies
12
Views
4K
Evening, Im working for a builder on a kitchen extension.. Now the usual procedure with this building contractor is do the essential checks...
Replies
24
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock