- Reaction score
- 56
AFDD will see stalled motor I believe
Discuss Fusing of fans to comply with manufacturers recommended instructions in the UK Electrical Forum area at ElectriciansForums.net
I said "I believe"How?
What about 3 Amp MK MCB - B Type - https://www.tlc-direct.co.uk/Products/MK5903S.html ?I ... tend to use ... MK boards - [which don't have] have 3 amp MCB’s.
Why not just wire the bathroom with a 3 amp fuse to the lighting and fan then wire everything downstream off the fused spur, problem solved
3-pole isolator switch with 3A fuse. This covers all the bases
Excel 3 Pole Fused Fan Isolator Switch - White | QVS Direct - https://www.qvsdirect.com/excel-3-pole-fused-fan-isolator-switch-white
Don’t understand this thread?
Don’t understand this thread?
Are you grown up?Ask a grown-up to explain
Are you grown up?
Can you explain what difference the permanent feed being fused at 3A would make to the requirement for RCD protection?
Can you further explain what the discussion regarding fusing both the permanent feed and the switched feed has in relation to the requirement for RCD protection?
I don’t do smiles.Whoops, touched a nerve! I did put smilies to indicate it was a joke.
Reply to Fusing of fans to comply with manufacturers recommended instructions in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.