D
daniel1234
Firstly hello, I am new to this forum :waving:. I am looking for some advise on my newly purchased alarm kit. I know this isn't them alarm section of the forum but that part of the forum is private. I brought myself a HW8GSM kit. It comes with a accenta g4 panel, which the manual states that no more than a total current of 1A is to be drawn from the Accenta panel in alarm conditions. Now I have worked out the current draw from all the items within the kit:
Accenta panel in alarm mode: 250ma
LCD keypad in alarm mode: 70ma
AG6 bell box in alarm mode: 520ma
PIRs in alarm mode total 6: 60ma
GSM AD06 in alarm mode: 310ma Total 1,210ma, Which is over the 1A limit for the Panel. Now my question is will this cause a problem with my alarm system? And is it possible someone could clarify if there is a set amount of time an alarm system should be able to run off its own power in stand by mode? Many Thanks
Accenta panel in alarm mode: 250ma
LCD keypad in alarm mode: 70ma
AG6 bell box in alarm mode: 520ma
PIRs in alarm mode total 6: 60ma
GSM AD06 in alarm mode: 310ma Total 1,210ma, Which is over the 1A limit for the Panel. Now my question is will this cause a problem with my alarm system? And is it possible someone could clarify if there is a set amount of time an alarm system should be able to run off its own power in stand by mode? Many Thanks