K
kev sanderson
hi
im having an issue with a pir detector currently installed at home, it is on the top of a wall which is approx 5ft high, mounted on a bracket so it sits above the line of bricks by about 200mm,
i am getting a lot of nuisance switching, have replaced the sensor but still happening, i am wondering if it is too close to the top of the wall? not sure how this would affect it but im running out of thoughts of what the issue could be,
if this is the reason, i could overcome it by fixing a length of timber to the wall in order to move he sensor so its higher up
any thoughts are welcome,
thanks
im having an issue with a pir detector currently installed at home, it is on the top of a wall which is approx 5ft high, mounted on a bracket so it sits above the line of bricks by about 200mm,
i am getting a lot of nuisance switching, have replaced the sensor but still happening, i am wondering if it is too close to the top of the wall? not sure how this would affect it but im running out of thoughts of what the issue could be,
if this is the reason, i could overcome it by fixing a length of timber to the wall in order to move he sensor so its higher up
any thoughts are welcome,
thanks