#~#~# Test-Meter Prize Competition #~#~#

[Paul.M]

Test-Meter has donated a prize for an Electricians Forum competition. All you have to do is:-

Show us your install


Simple really, just post up a picture of anything that "you have installed" recently and post it up. Test-Meter will judge each picture themselves and choose a winner. The prize is:- Electrical Insulation Tester - Electrical Cable Insulation Test Meter



Sorry about the poor quality photo, I've broken the lens on my phone, whoops.

You can post up any electrical install due to the nature of all of our different type of works.

This is worth £100!!! Very generous of Test-Meter to hand over such a prize, thank you. I will leave the competition open for 4 weeks and see if everyone has had the chance to enter.

Have fun and good luck

Paul M

 

[HappyHippyDad]

I haven't posted anything I've done before.. too scared. But I thought I'd post this up before I see anyone elses work of art as then I'd lose my bottle!

The customer wanted 2 lights in the main part of container and 1 (seperately switched) in the smaller part, along with sockets. Isolation switch and timer for 10 outside lights up driveway and another switch for PIR floodlight (so can manually overide if wanted).

1. Beginning


2. In the middle


3. The end


ps.. I have since finished the trunking off nicely with end caps, T caps etc.

 

[trev]

I'm not usually one for taking photos of my work, it's always seemed a bit ---- in the past but here's a CU I did a few months back.

 

[GMES]

Here is a job I did on 2nd December 1982.
I also thought I would follow hhd idea of beginning middle end, Let me know where I can collect my prize.

 

[Paul.M]

Dont think you will win with that effort GMES, you have to post up an install not a downfall!

 

[HappyHippyDad]

I'm not usually one for taking photos of my work, it's always seemed a bit ---- in the past but here's a CU I did a few months back.

Very neat Trev!

No front cover would be a C1 though, sorry mate

 

[trev]

Very neat Trev!

No front cover would be a C1 though, sorry mate

Well Der! I didn't bother to juice it up!
I can't be trusted to do a proer job

 

[Sintra]

I'm not on the tools very much but I had a board to change today. Only have pictures of the middle and the end lol.

So here it is.

 

[Simon-0116]

Very neet, why cant I open a board that looks like that

 

[dingledong]

It's going to to be a hard choice so far every job's a cracker
Who is going to choose the winning pic/pics