Discuss Watch this- new gen PV Panel in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net
Share this page
OP
MorganPVI
200 Series | Solyndra
Would be a good product for the right situation - dependant on pricing of course.
Would be a good product for the right situation - dependant on pricing of course.
OP
solarfred
Just love to be the guy that has to climb over and clean all those little tubes in 10 years time.
- Reaction score
- 386
Saw these at ecobuild ,had alook at vid but had no sound for some reason ,rep at show said they have reduced windlift and are meant for surfaces with reflective backgrounds so looks like commercial only but he could'nt comment on temp co efficients of this system which would be a factor for this type of pv
OP
SRE
Have they been MCS approved yet?
OP
mmccx
it is'nt new, they have been around in the Uk for at least a year now, and apparently they sell well in america! also they aren't particularly efficient as far as i know 12-13%, something around 2m^s for 230Wp off the top of my head
aslo check out the Vmpp on the data sheet... 98.4v for a 230Wp modules, i thing you may need a few inverters to get a decent size system
aslo check out the Vmpp on the data sheet... 98.4v for a 230Wp modules, i thing you may need a few inverters to get a decent size system
Last edited by a moderator:
Reply to Watch this- new gen PV Panel in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net
Share this page
Similar Threads
Hi everyone, I am new to photovoltaic system installation, can you guys give me some advice.
Currently I plan to purchase a Maysun Solar 800W...
My best mate has been medically retired from the prison service at the young age of 52 and has time on his hands :D
He's looking at a 'plug in'...
Hello fellow professionals,
I'm currently facing a challenging scenario that involves the integration of solar photovoltaic (PV) systems on roofs...
Greetings, everyone,
After dedicating over a month to researching Solar PV systems, I'm nearly ready to make a decision. I owe my progress to...
Ok, installing a new CU with type 2 SP. The installation has an existing PV 6 panels protected by a 16a MCB at the fuse board. TBH I don't really...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.