You need to re-read post #13...
A 'granny cable' or more correctly a Mode 2 charging cable will incorporate an In-cable Control Box (ICCB) that has RCD functionality.
thanks yes, but a granny charger does not have an RCD which is capable of measuring >6mA DC.
 
Good quality and new 'granny chargers' should have rcd protection of some sort built into them now.
seen some awful chinese ones that didnt have it mind. use at your own risk sort of stuff.
 
  • Like
Reactions: treezleef

..theabove video prooves that the granny chargers contain no ">6mA DC leakage" detection or protection.
So it seems surprising that EV chargers have to have it.
 
thanks yes, but a granny charger does not have an RCD which is capable of measuring >6mA DC.
From Jan 2018 a Mode 2 cable ('granny cable') manufactured to BS EN62572 had to have >6mA DC fault protection.

btw... it's not a 'granny charger' it just supplies 230AC to the on-board charger.
 

..theabove video prooves that the granny chargers contain no ">6mA DC leakage" detection or protection.
So it seems surprising that EV chargers have to have it.
No, it is probably legacy that these rubbish granny chargers do not.

Rcd and dc leakage are two seperate functions, they may be within the one device, in which case it is no longer an rcd it is a combined device.

You have to provide suitable protection on all equipment to disconnect in the case of a fault, ADS is not always sufficient, in which case RCD or equivalent protection is required. If you cannot rely on a standard RCD then you either need a special RCD or additional protection to disconnect.

It isn't a difficult concept.
 
From Jan 2018 a Mode 2 cable ('granny cable') manufactured to BS EN62572 had to have >6mA DC fault protection.

btw... it's not a 'granny charger' it just supplies 230AC to the on-board charger.
Thanks,from 7:40 onwards, the efix experts are saying that "granny charge points" dont have ability to detect the >6mA DC. This video is from 2021....

 
Thanks,from 7:40 onwards, the efix experts are saying that "granny charge points" dont have ability to detect the >6mA DC. This video is from 2021....

I have an old landrover from 1980, and that doesn't have the latest emissions limit introduced in 2018.

Why is it that the landrover group doesn't have to meet the emissions limits like other car manufacturers???
 
  • Like
Reactions: treezleef
Thanks, but it seems different.....car emissions is bad, but electric shock (so they say), is instant death. ...or so they say...(incidentally, having taken many full 240VAC mains across the chest, often with my pectoral muscles vibrating at 50Hz...i dont believe leccy is as bad as they say, but thats just me.)
The "powers" say that leccy is deadly....instantly so....so it seems odd that old granny charge points arent banned.
I have no idea how we can check if granny charge points do need >6mA detection, because most like me cant afford the standards.
 
  • Dislike
Reactions: DPG
Thanks, but it seems different.....emissions is bad, but electric shock (so they say), is instant death. ...or so they say...having taken many full 240VAC mains across the chest, often with my pectoral muscles vibrating at 50Hz...i dont believe leccy is as bad as they say, but thats just me.
The "powers" say that leccy is deadly....instantly so.

Plenty of people might disagree if they weren't already dead from electrocution.
 
  • Like
Reactions: DPG and Julie.
Thanks, but it seems different.....car emissions is bad, but electric shock (so they say), is instant death. ...or so they say...(incidentally, having taken many full 240VAC mains across the chest, often with my pectoral muscles vibrating at 50Hz...i dont believe leccy is as bad as they say, but thats just me.)
The "powers" say that leccy is deadly....instantly so....so it seems odd that old granny charge points arent banned.
I have no idea how we can check if granny charge points do need >6mA detection, because most like me cant afford the standards.

Dangerous attitude. Electricity can, and does, kill.
 
  • Like
Reactions: nicebutdim
What about "granny chargers" on TN-C-S supplies, This could possibly pose a large shock risk. (iv pulled the pin out of the grenade)

But as reg 722.411.4.1 says any outlet which is likely to be used to charge a car cannot use a PME earth without other precautions

And as mentioned previously BS EN62572 means >6mA DC fault protection has to be included in the granny charger

So if using quality items on a decent electrical installation, then there should be no risks


But you will always be able to buy a cheap crap granny charger straight from china, and plug it into a non RCD socket circuit in a house in which the fixed wiring could do with TLC and has not been inspected since it was installed 50 years ago

I mean you can order the so called "suicide showers" to the UK from china, kind of says it all
 

Similar threads

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

Joined
Location
southampton
If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
United Kingdom
What type of forum member are you?
Electrical Enthusiast (Unqualified Hobbyist etc)

Thread Information

Title
Why does a "granny" charger for EV (<10A) not need an RCD?
Prefix
N/A
Forum
Electric Vehicles Advice Forum
Start date
Last reply date
Replies
30

Thread Tags

Advert

Thread statistics

Created
treezleef,
Last reply from
marcuswareham,
Replies
30
Views
10,342

Advert