Adaptable box with front entry.

[RDB85]

If you are insistent on not burying get a few lengths of 25mm galv tube and the appropriate fittings in con lock you won’t need a bender of dia set then

I know what you mean about burying the cable. It would be a bit of hassle trying to lift up the blocks as they’ve been cemented in. I’ve not heard of con lock. Where would be the best place to get it from?

 

[Yozza19]

I know what you mean about burying the cable. It would be a bit of hassle trying to lift up the blocks as they’ve been cemented in. I’ve not heard of con lock. Where would be the best place to get it from?

Cef Hyton stocks it basically it it conduit box’s and bends with a Alan key to lock in place and not threaded

 

[RDB85]

Cef Hyton stocks it basically it it conduit box’s and bends with a Alan key to lock in place and not threaded

CEF don’t seem to do it. I will see if any other ones stock it.

 

[nicebutdim]

Search "conlok" in Google or any other reputable search engine and lots of UK results will be returned.

It may be that individual CEF branches stock the stuff, but it's not listed on their website.

 

[RDB85]

Search "conlok" in Google or any other reputable search engine and lots of UK results will be returned.

It may be that individual CEF branches stock the stuff, but it's not listed on their website.

I’ve done that. I’m a bit dubious of some of the sites.

 

[Yozza19]

I’ve done that. I’m a bit dubious of some of the sites.

Cef Hyton Liverpool definitely stock it we use it quite regularly for adaptions and they stock it for us

 

[RDB85]

I’ve found some on this website:

Search - Conlok

www.ccmsupplies.co.uk

Conduit in 25mm

25mm Galvanised Class 4 Steel Conduit 3 Metre Length

Threaded ends with one end fitted with a coupler Class 4 conduit hot dipped galvanised inside and out High level of corrosion resistance Diameter: 25mm

www.ccmsupplies.co.uk

Saddles:

25mm Galvanised Distance Saddle

25mm Distance Saddle Saddles suitable for use with 25mm galvanised conduit Malleable Base

www.ccmsupplies.co.uk

 

[MJPD29]

Can't see Conlok lasting long floating above the gate. Threaded for me every time.

 

[nicebutdim]

Can't see Conlok lasting long floating above the gate. Threaded for me every time.

Having used it in an installation it's much better than I'd expected, but threaded connections would definitely be better across a gate where conduit is supported only by those connections.

 

[westward10]

Conlock is IP30 so in a few months it will be full of water.