First MFT advise please

[Matthew]

Evening all... Looking for some advice buying my first MFT - got my inspect amd test after Xmas.

Looking at the usual 2nd hand auction sites (cant afford new) and looking at under 300.

Think i have narrowed it down to-

Kewtech KT64.
Fluke 1653
Metrel MI3000.
Not really looked at megger.

Any opinions - guidance/suggestions? Thanks

 

[Fitzy]

I got both my kewtech KT64 &KT65 from eBay. The KT65 was from testermans-uk on eBay, they sell refurbished & calibrated used MFT’s.

 

[Deleted member 26818]

I like the Metrel MI3000.
Comes with rechargeable battery and is very easy to use.
Only drawback, is it does not test type B RCDs.

The cost of a new one, is less than a 2nd hand Megger.

 

[Andy78]

I've been using a MI3000 for 6 years now. Got it as a cheap MFT with a view to upgrading to a better one eventually. Not yet seen a need to. It had a set of new rechargeables last year and that's about it. Passes every calibration with no adjustments needed.

 

[kropaske]

+1 for Metrel mi3000, evertime I get it calibrated the guy is very impressed how accurate it is.
Downside - it work as 3 wire for loop tests on Z(rcd)
If you looking for second hand one look for blue with black or grey frame, yellow ones were the oldest models.

 

[chris gray]

I like fluke for the test button on the lead

 

[sparkdog]

Martindale ET4000 I find it really good. 3 wire loop& rcd test but got used to it.

 

[Deleted member 105166]

If you buy a second hand MFT from an auction site, ensure it has a recent calibration certificate and a legible serial number (ask for a photo to verify). If a private seller, look at their sales history and that it stacks up with their reason for sale. In other words, do everything you can to ensure you're not buying something hot. Better still if you can buy a second hand unit from a forum member.

 

[Matthew]

Thanks - i have put an ad in the wanted on this forum so hopefully someone will have something!

 

[suffolkspark]

I bought my KT63 for like £360 brand new, ive compared it to a mates kt64... Only thing i can see it doesnt do is phase rotation...

 

[Gavin John Hyde]

I bought my KT63 for like £360 brand new, ive compared it to a mates kt64... Only thing i can see it doesnt do is phase rotation...

Have to admit i quite like the kt63. Its a quick and reliable tester. I have the kt64dl myself.
When i took it into be calbrated i borrowed a Dilog MFT and was actually quite impressed with how good it was.
I think we fall into a trap too easily of going for megget, kewtech, fluke etc..
The martindale and robbin ones are quite good too.

 

[MFS Electrical]

I like the meggers I’ve always had a megger and they’ve never let me down currently got a 1720, a 1730 and another-1741 I think? did have an old 1553 still kicking about but sold it locally a few months back. I have tried other brands but to me meggers are pretty much the best.

 

[Zdb]

I bought my KT63 for like £360 brand new, ive compared it to a mates kt64... Only thing i can see it doesnt do is phase rotation...

Don't think it does RCD ramp testing either.

 

[Matthew]

Currently got my eye on this:

Kewtech KT64 Mutlifunction Tester 17th/18th edition tester calibrated | eBay - https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F332879144293

Or if that link doesn't work!# ebay item number 332879144293

 

[suffolkspark]

Don't think it does RCD ramp testing either.

It does

 

[Deleted account]

I've got a KT 64 7 years old updated it to the kt65 this year.

It's out of calibration, a bit worn but in working order if interested make me an offer.

I personally love the Kewteck. Really simple to work.
I've got a spare set of Kewteck light fitting tester attachments with one missing I would throw in too.

I would be happy to send to you once a reasonable offer is made and if your happy it works then send cheque or bacs. If not sent machine back, you pay postage my way, I pay postage yours.

I can't say fairer than that.

Wait and see if you get a good deal on the eBay one then PM me if you don't.

 

[telectrix]

bought my 1553 megger off MDJ 2nd hand with 12 month calibration, 5 years ago. has passed calibration each year since and has not missed a beat.

 

[HappyHippyDad]

I used my Mi3000 for years and was pleased with it. I have now got a megger, I feel more confident in the results it gives me as sometimes the MI3000 gave inconsistent readings even though it was calibrated. However, I think it is a good choice to start out with. It is easy to use and affordable.

 

[Deleted account]

Don't think it does RCD ramp testing either.

If you mean the kt64 it does do ramp test, if you mean the kt63 not sure.

 

[buzzlightyear]

I WILL SHOUT THIS OUT ,MEGGER,MEGGER .MEGGER .
THE END .

 

[Matthew]

You like megger then!! Which one would you get - i cant tell the difference as there are alot of different models

 

[telectrix]

You like megger then!! Which one would you get - i cant tell the difference as there are alot of different models

ALL DEPENDS ON YOUR BUDGET. THE MEGGER 1553 DOES EVERYTHING YOU NEED EXCEPT FOR PHASE ROTATION.

 

[buzzlightyear]

You like megger then!! Which one would you get - i cant tell the difference as there are alot of different models

MFT1731, MFT1721 and MFT1711 - https://uk.megger.com/multifunction-installation-testers-mft1731,-mft1721-and-mft1711. go for the 1721.

 

[buzzlightyear]

You like megger then!! Which one would you get - i cant tell the difference as there are alot of different models

MFT1731, MFT1721 and MFT1711 - https://uk.megger.com/multifunction-installation-testers-mft1731,-mft1721-and-mft1711. go for the 1721.

 

[buzzlightyear]

ho ,

s, its duplicated again .

​

 

[Baddegg]

KT63 does ramp testing,bought mine second hand a couple of years ago when I first started with a view to getting better once I could justify the costs......still got it and still like the simplicity of it,passes calibration every year no probs

 

[static zap]

I WILL SHOUT THIS OUT ,MEGGER,MEGGER .MEGGER .
THE END .

... Was that Megga loud ...

 

[rapparee]

I WILL SHOUT THIS OUT ,MEGGER,MEGGER .MEGGER .
THE END .

He wants a fluke. Your learned debate in favour of Megger is...

 

[buzzlightyear]

I love them fluke comes in a banana box .

 

[Rpa07]

ALL DEPENDS ON YOUR BUDGET. THE MEGGER 1553 DOES EVERYTHING YOU NEED EXCEPT FOR PHASE ROTATION.

He’s shouting because he’s got his Bluetooth earphones in thinking that the Bluetooth facility lets him listen to Jeremy vine - he hasn’t a clue but still lives the 1553 AS DO WE ALL!

 

[TomB]

I rate the meggers but could never stretch my budget that far, i ended up going for a Di-Log. Never let me down and has all the functions you need. Friend of mine got one on an auction site for £200 calibrated and including postage

 

[Noaksie]

Evening all... Looking for some advice buying my first MFT - got my inspect amd test after Xmas.

Looking at the usual 2nd hand auction sites (cant afford new) and looking at under 300.

Think i have narrowed it down to-

Kewtech KT64.
Fluke 1653
Metrel MI3000.
Not really looked at megger.

Any opinions - guidance/suggestions? Thanks

If you can stretch the budget have a look at the new Di-Log units the 9110 is great for domestic testing. I went for the 9118 as I do loads of commercial industrial work. These units are fully 18th edition compliant. Build quality and functionality A1 I've been a fluke man in the past not any more. Every sparks has there own preference as to which tester they prefer

 

[Noaksie]

Evening all... Looking for some advice buying my first MFT - got my inspect amd test after Xmas.

Looking at the usual 2nd hand auction sites (cant afford new) and looking at under 300.

Think i have narrowed it down to-

Kewtech KT64.
Fluke 1653
Metrel MI3000.
Not really looked at megger.

Any opinions - guidance/suggestions? Thanks

If you can stretch the budget have a look at the new Di-Log units the 9110 is great for domestic testing. I went for the 9118 as I do loads of commercial industrial work. These units are fully 18th edition compliant. Build quality and functionality A1 I've been a fluke man in the past not any more. Every sparks has there own preference as to which tester they prefer

 

[a-z electrics]

I bought a metrel eurotest combo MI3125 for well under 300 direct from metrel including calib cert. It was an ex demonstrator I think but sold with 12 months warranty. Been great..
I only got it ad a back up really as my MI 3100 needed repair. Metrel seem good value but i never used anyone elses..

 

[stevels4]

I have my Megger 1710, Di log clamp meter, Fluke DMM and PRT in the for sale section for less than just the MFT if interested.