More than one circuit on breaker

[Tiger]

the regs permit it,

Where, my book says it should be protected by 20amp

 

[flukey]

just looking it up.
what reg number you got

 

[Tiger]

page 363

 

[Richard3009]

its not a radial, you can't have more than one double 13A on it, a radial you can providing the conductor size is correct for the potential load.

 

[flukey]

didnt mean you tiger, was asking richard.

dont forget Ib has to be equal to or greater than In when selecting a cable richard.

point me to the correct reg and i will stand corrected

 

[Richard3009]

so based on this you cant spur from the breaker itself

 

[Spudnik]

If there was a radial circuit from a 20A MCB then thats fine

If there was a "spur" from a 32A RFC MCB then that is also fine.

It is no different at all to taking a spur off the back of a socket or at any point in the ring via jb.

Pg 362/3

 

[wet string]

the spur should only feed one outletunless fed through 13afcu so max current via 13amp plugs, 26amps.

 

[Richard3009]

If there was a radial circuit from a 20A MCB then thats fine

If there was a "spur" from a 32A RFC MCB then that is also fine.

It is no different at all to taking a spur off the back of a socket or at any point in the ring via jb.

Pg 362/3

Correct

 

[Tiger]

yougot aproblem withyour keyboard