one of many to follow Im sure but ......

[malcolmsanford]

Symbols page 36 but well done for finding 442.2

 

[SimpleSimon]

found substations in the index and under reg 442.2 it says either Uf U1 or U2 so it must me U. what does U represent again please ..

If you are who i think you are....i found you

Sent from my GT-I9100 using Tapatalk

 

[lofty84]

nice one mal

 

[lofty84]

u have mate

 

[lofty84]

u = voltage between lines.

Hard to get to grips with but this red book is good

 

[malcolmsanford]

u = voltage between lines.

Hard to get to grips with but this red book is good

Keep at it son taken me nigh on 40 yrs and it is still a mystery

 

[lofty84]

A 70 degrees C thermoplasic insulated and sheathed cable to BS6004 is installed in an ambient temperature of 25 C for part of the run and then enters an area of 40 degrees C. the effect on the cable will be to....

Im trying to find the answer to this by useing the regs but what do I look up in the book

 

[SimpleSimon]

Didnt take long but glad to see you on here. Glad to see your asking questions still. Just remember your power triangles thats the key to alot of it.

Sent from my GT-I9100 using Tapatalk

 

[SimpleSimon]

A 70 degrees C thermoplasic insulated and sheathed cable to BS6004 is installed in an ambient temperature of 25 C for part of the run and then enters an area of 40 degrees C. the effect on the cable will be to....

Im trying to find the answer to this by useing the regs but what do I look up in the book

Pg. 325 table 4b1
Sent from my GT-I9100 using Tapatalk

 

[lofty84]

lol im full of em mate, annoying im sure but needs must and all that..

 

[SimpleSimon]

As long as you take it all on board no harm in asking questions.

Sent from my GT-I9100 using Tapatalk

 

[lofty84]

are you useing the green book Si, in my book table 4b1 is on page 267 ... weird

answers got to be D as its going down from 1.03 to 0.87.... thanks mate x

 

[SimpleSimon]

are you useing the green book Si, in my book table 4b1 is on page 267 ... weird

answers got to be D as its going down from 1.03 to 0.87.... thanks mate x

I couldnt tell you the answer matr as you didnt give us the multiole choice section.
thanks for tge kiss.

Sent from my GT-I9100 using Tapatalk

 

[mo the test]

could i enquire the type of supply?

 

[i=p/u]

you can enquire the type of supply and the max external reading (Ze) but once your told once , you'l never forget

 

[telectrix]

could i enquire the type of supply?

think it's electrical

 

[lofty84]

opps the options are or were
a)requires greater clips
b)reduce the voltage drop
c)increase the bending radius
d)decrease its current carrying capacity

 

[SimpleSimon]

Than D

Sent from my GT-I9100 using Tapatalk

 

[lofty84]

cheers everone for your help passed with flying colours and made it to the top of the class. woop woop