Can i legaly rip out the kitchen ring main and replace myself?

[RISElectrical]

I disagree with that. There are people who dabble in electrics, and may well have been sent on a 16th edition course by their employers years ago (many firms even bring a trainer in for a few days to save money), and then there are those with a proper apprenticeship/training scheme and qualifications under their belt.

Quote:

3 Can the ring be placed in those white plastic ducting (conduits) and then running the conduits along the wall behind the base units, with runs up to the sockets behind the tiles?
​

You think an electrician would use those words?

​

He does use the term conduit tho?

 

[Plonker 3]

I disagree with that. There are people who dabble in electrics, and may well have been sent on a 16th edition course by their employers years ago (many firms even bring a trainer in for a few days to save money), and then there are those with a proper apprenticeship/training scheme and qualifications under their belt.

​

There are people doing similar courses with the advent of the Electrical Trainee and these are being allowed to join a Part P scheme with probably less experience than the OP. Where is the difference?

 

[Guitarist]

He does use the term conduit tho?

So does my 16 year old son. Even DIY'ers know some words used by electricians

 

[Guitarist]

There are people doing similar courses with the advent of the Electrical Trainee and these are being allowed to join a Part P scheme with probably less experience than the OP. Where is the difference?

You actually know how much experience the OP has had?
Not sure why you are so convinced that people who come on here, claiming to be electricians, actually are when they use terms like "

those white plastic ducting".

​

​
​

 

[RISElectrical]

I was slightly tongue in cheek my comment, however in the OP it said passed my C&G on 16th edition or words to that effect, now i took that to mean, did an apprenticeship in the 16th edition, not just sat the 16th edition exam.

Maybe the OP could clear this up?

 

[Plonker 3]

You actually know how much experience the OP has had?
Not sure why you are so convinced that people who come on here, claiming to be electricians, actually are when they use terms like "

those white plastic ducting".​

Well as he said that he had rewired several houses before then I would that is competence enough to say yes he is a electrician. There is lots of advice given on here without anyone actually asking to show there qualifications or competence,so why is this thread any different?​

 

[DPG]

Well as he said that he had rewired several houses before then I would that is competence enough to say yes he is a electrician. There is lots of advice given on here without anyone actually asking to show there qualifications or competence,so why is this thread any different?[/COLOR][/LEFT]
[/I]

Mmmm. I've plastered several walls before, but they were all crap! Daz

-

 

[Fleetwood]

I think it stinks a bit that a fully qualified person is unable to do certain work just because he isn't Part P registered. It's another government way to collect money. House wiring isnt as complicated a factory installations which involve 3 phase etc. I realise Building regs can change and a sparkes needs to keep updated, but part 3 is overkill. Likewise, I don't think any person should attempt electrical work unless they have had training, allbeit in factory, home or telecommes environment. What do they know about running cable and correct termination. Probably end up with loose connections and no spare to play with when you come to change a fitting. Mind you, I'm sure a lot of Part 3 Qlfd. are guilty of not leaving enough spare.

 

[Dave 85]

'Part 3 Qlfd'


eh?

 

[Knobhead]

The OP seems to have gone missing, so you can guess all you like.

 

[Guitarist]

Well as he said that he had rewired several houses before then I would that is competence enough to say yes he is a electrician. There is lots of advice given on here without anyone actually asking to show there qualifications or competence,so why is this thread any different?[/COLOR][/LEFT]
[/I]

Personally, as I said earlier, I know loads of fitters who know nothing about electrics but used to do rewires in the old days, armed with their 16th edition company paid-for qualification and a bit of advice from various sparkys.
You think what you want, and so will I.

 

[Fleetwood]

Registered not quaified, sorry guys, terminological error.

 

[Fleetwood]

Registered not quaified, sorry guys, terminological error.

 

[Taylortwocities]

Competent?

 

[sys3]

As with gas, electrics should be left to trained professionals.

 

[Silly Sausage]

If you read the Part P document, it is allowable to replace any cable and accessories that are already there, without notifying.
Please correct me on that if I'm wrong!
So essentially you can rewire a complete circuit at will, following the exact path of the old one of course!, but don't touch the protection.
Apart from the addition of the pro, how does that really differ from installing a completely new cct?
It's a load of...

 

[Fleetwood]

Are you saying that an unregistered Part P person can quite happily replace a hard wired oven as they only have to connect from the oven to the connection outlet. No fixed wiring disturbed, no change of MCB. Nothing to notify.

 

[Plonker 3]

Just because you are not registered doesn't mean you are not competent to do the job.

In answer to your question yes that is correct, or replace any other cable as long as the route is unchanged and the CSA remains the same.

 

[Guest55]

The OP seems to have gone missing, so you can guess all you like.

Well after 4 / 5 pages of debate i'm hoping he's completely ignored us and cracked on with the job lol.

 

[RISElectrical]

Id have done the job without asking you lot haha, I'd of been able to sleep easier that way!