Discuss Connection supplying 3 fridges in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

A

Abot

Hi Electricians!

i need help for safer connections this 3 fridges power supply.
The 3 fridges power are 150W, 250W, 300W. To be installed in the commercial kitchen.

There is an suspended (about 100mm from the floor level) connection box under one of the fridge.

i am planning to put 6amp breaker to protect this 3 fridges.

please advice.... Thank you very much...
 
Advice? Employ the services of an electrician is the best advise we could possibly give. That 6A breaker won't hold for long!



Thank you davesparks for advice. I'm a beginner electrician and needs more experience...
I hope I could install and learn for this...


What could be other basis for computing for breaker. Other than Power/240V?
 
Thank you davesparks for advice. I'm a beginner electrician and needs more experience...
I hope I could install and learn for this...
[emoji4]

What could be other basis for computing for breaker. Other than Power/240V?

The only way to learn this practical trade is by working alongside an experienced tradesman.
We could probably assist with the theory here, but the practical side if what is correct and safe and what is not can only be assessed by actually being on site.
Power/240 will give you the running current if the appliance is working at unity power factor. It will not tell you what inrush current is likely to occur on startup
 
Hi Electricians!

i need help for safer connections this 3 fridges power supply.
The 3 fridges power are 150W, 250W, 300W. To be installed in the commercial kitchen.

There is an suspended (about 100mm from the floor level) connection box under one of the fridge.

i am planning to put 6amp breaker to protect this 3 fridges.

please advice.... Thank you very much...


Abot, if you post your location, one of the experienced guys may be close to you. some of us old farts don't need to earn all the hours God sends and have got time to spare and , if you were local to me, i'd be happy to give you a couple of hours mentoring on the job. i'm sure some of the other guys would do the same. have you joined the trainee section? lots of cyber help in there.
 

Reply to Connection supplying 3 fridges in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Similar Threads

Hi, just looking for advice. Ive been to look at a Fire alarm install job. While checking where i will take my supply from. 3 phase sub board, i...
Replies
20
Views
1K
Hello, Looking for some advice following a botched 3 phase upgrade today. Some background: Commercial unit originally fitted out (4 years ago)...
Replies
7
Views
616
Hi, I have lifetime experience (50+ years) in United States with basic knowledge of split phase 120/240 volts replacing wall switches and...
Replies
5
Views
496
Hi all, I am at odds on whether RCD protection is required on an SWA of 14 metres, clipped direct under flooring direct from CU to an exterior...
Replies
9
Views
770
I may have posted this before but not sure if it made it in. I want to install an EV Charger in my garage. The panel is two stories up and the...
Replies
0
Views
496

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock