Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members

Discuss Control Panel Building. in the Commercial Electrical Advice area at ElectriciansForums.net

S

Spudnik

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Chaps,

i have been asked to build a new control panel for an irrigation system.

Now, long story short, there was one there, but vandals have broken in and set fire to it, so i have no reference as to what was there before.

Anyhoo, i havent been to look at the job yet as its some distance away.

So, once i have the spec, would any of you chaps care to help me assemble this thing via the forum?

I have a very basic knowledge of them as i have installed 'pre-assembled' ones before, but they are all different as they are designed to each irrigation system and pump etc.

And no, i wont be paying you.

Much obliged:D
 
uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members
G

Guest123

  • Thread Starter Thread Starter
  • #2
Hey bud.

I been trying to post pics on here of a panel that I built and installed today!!!:)

I dont get to build panels much as like you say they usually come pre-made with the equipment you're installing and just need a supply.

Mine was for a swimming pool install, pumps, fans, heaters, filters etc. Had a rough spec from pool people and away to go.

Have to say , really enjoyed putting it all together, different I suppose.

There's plenty of dudes on here that do this day in day out I'm sure we can all help you out.;)
 
S

Sparky-Tom

  • Thread Starter Thread Starter
  • #3
Jason,

I build panels for various systems virtually every week, Ive never built one for an irrigation system, but how hard could it be? (Famous last words!) :p

What sort of system are they looking for? PLC controlled? Relay logic?

Any problems, I will willingly help! :D
 
S

Spudnik

  • Thread Starter Thread Starter
  • #4
Thanks chaps.

Job isnt for a couple of weeks yet, but i thought i would gauge interest first before i said yes.:D
 
G

Guest123

  • Thread Starter Thread Starter
  • #6
Who's gonna be B.A then??????
 
G

Guest123

  • Thread Starter Thread Starter
  • #8
Sparky-Tom has put his name forward.:D
 
A

Andy Smith

  • Thread Starter Thread Starter
  • #15
Hi Jason.s more than happy to help, built and rebuilt a few panels in my life. Not irrigation systems but control panels none the less. have experiance in plc control with HMI if that helps good luck.
 
Last edited by a moderator:
Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members

Reply to Control Panel Building. in the Commercial Electrical Advice area at ElectriciansForums.net

Top Bottom