Lighting contactors physical wiring

[Richard3009]

Say I have a load of lights that require a cable size of 10mm through a contactor fused accordingly, what is the technique for tapping each individual light off this 10mm radial, what methods are available to tee off the circuit to each fitting. I assume a fused spur is required at each and every fitting.

 

[Knobhead]

Correctly fused and identified BS1363 socket.

 

[Richard3009]

A fused socket ?

 

[Knobhead]

Plug and socket!

Will that do you!

When will you be coming back with how do I wire a contactor?

Bloody Electrical Trainee’s!

 

[Richard3009]

why is everyone on here so friendly

 

[GMES]

We are so friendly because we love doing other peoples jobs free of charge, it gives us a warm tingly feeling inside.

 

[Richard3009]

Then simply don't answer the question, I was just wondering how it was done I understand the schematic design and how it works in theory, and just wondered how it was achieved in the real world, sorry for asking.

 

[Knobhead]

I answered you ungrateful little ****! Bog standard practice and you have to ask?

 

[trev]

I answered you ungrateful little ****! Bog standard practice and you have to ask?

Tony, I'm sick of you beating about the bush mate. Can't you just tell it like it is

 

[micknew]

Then simply don't answer the question, I was just wondering how it was done I understand the schematic design and how it works in theory, and just wondered how it was achieved in the real world, sorry for asking.

What were you taught to do at college?

 

[ayjay]

report them richard there a bunch of ****s i always wire lighting in 10mm twe btw

 

[Richard3009]

I have had 30 years in the game, I know the answers just seeing how far up their own arses they are

 

[trev]

Do you know how to shoe a horse ?

Done it loads of times, I find using a towel makes it shoo faster than just shouting at it.

 

[Richard3009]

and from what I'm reading a long way is the answer

 

[GMES]

I have had 30 years in the game, I know the answers just seeing how far up their own arses they are

And yet your asking apprentice questions, what are you the oldest YTS ever

 

[PEG]

Cheer up,Richard,just a bit of site banter,keyboard applied...I have fitted a shoe,hot,but believe it or not,i cannot tell you the farriers' name,as he could be reported to the Guild... form a hard skin,and return. :stooge_curly:

 

[Richard3009]

grin :stooge_curly:

 

[trev]

Oh come on, I've seen people ask stupid questions on a site and they've been torn to bits. It's happened to me and probably most on here.
It's the way it goes. Grow a pair and learn to laugh at yourself while resolving never to ask a daft one ever again.

 

[Knobhead]

It comes with practice. A sharp tongue honed by years of dealing with stupid contractors.

 

[Richard3009]

It wasn't a stupid question, you can design circuits on paper and not know the physical devices used.