Wylex Compatibility

[suffolkspark]

I agree with @suffolkspark that doesn't look like Wylex. The cover door looks too big, the embossed ON/OFF and CE mark is not a Wylex thing and the cover screws are off centre.

Yea I suspect its a PEP board (premium electrical products) with a 100ma wylex slung upfront, which is kinda correct given its TT as I see a lot of metal dual rcd boards on TT with no 100mA upfront, but I bet its not time delay, and obviously it's wrong brand. @OP PEP do do rcbos so that's probably going to be your route if your keeping that enclosure and get a PEP main switch back in it, can only see them on ebay from a quick look though

 

[westward10]

Just found a 10A rcbo on eBay but seem as rare as hens teeth.

 

[suffolkspark]

Just found a 10A rcbo on eBay but seem as rare as hens teeth.

Oh yea thats all I can see too, if the fault can't be found then it's rip it out and bin it i guess

 

[mattg4321]

I decided yesterday to price to rip all out and start again. More hassle than it's worth otherwise!

 

[AJshep]

Not sure if that would be permitted as it’s a wylex enclosure?

It’s very annoying how Wylex keep changing all the parts so they are not backwards compatible every 5 years or so. It’s mainly why I don’t use them!

Don't think that's a Wylex enclosure. It's a PEP enclosure. Ive only ever seen one once and that was on EICR a few week back.. Funny enough that had a few mixed mcbs too.

 

[Mike Johnson]

Hager dual and single RCBO's do fit a Wylex board and any busbar with a 13mm dual or single pitch will fit in a straight line.