G

goenviro

I rent an old property so need to minimise any changes to it.
My office is a large room (6m x 7m) with a single bayonet pendant light socket which eats thru 100W bulbs and as I get older I'm finding that there is insufficient light. So I purchased some LED light panels to install over my desk and in the other half of the room and was hoping for some advice on how best to connect them to the pendant light (which is somewhat of centre in the room) with as little an impact as possible.
I did go looking to see if I could find a plug that would adapt the bayonet fitting to supply a power lead to the LED lights but had no success in that so far - any good advice would be gratefully welcomed.
 
Do the new fittings need an earth.
 
Do the new fittings need an earth.

unlikely but a very good point.
the above plugs for light fittings are NOT SUITABLE for supplying any light fitting that requires an earth.
 
  • Like
Reactions: DPG and westward10

Similar threads

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

Email
Joined
Time zone
Last seen

Thread Information

Title
DIY upgrade lights to LED in room converted to office
Prefix
N/A
Forum
Lighting Forum
Start date
Last reply date
Replies
4

Advert

Thread statistics

Created
goenviro,
Last reply from
James,
Replies
4
Views
1,007

Advert