Discuss Part p schemes in the Business Related area at ElectriciansForums.net

C

chrisday3000

Hello everyone,

Sorry if this has been asked for more but I could not find the answer anywhere.

Basically, I am planning on getting Part P registered and also want to be able to do EICR's.

I have done an advanced apprenticeship however I do not have my 2391, which I read on Elecsa's website this was a requirement.

Do all Part P schemes require this?

Many Thanks, Chris.
 
could be that elecsa require 2391 if you want to do EICRs under their banner. in fact, you don't even need to be a member to do EICRs, but it helps if something goes wrong. i would speak to elecsa about this.
 
No mate check the elecsa site, all the info is on there. It's better to do 2391 or whatever it's going to be called soon but it's not compulsory
 
best speak to elecasa. i know severasl members who ain't done 2391.
 
You can still do electrical work in peoples homes, pubs and factories and not be a member of a part P scheme, it just becomes a bit more awkward with the notifiable work (only pertinent to residential dwellings, I know) should you happen to do some.

Just food for thought, they are middle men basically that add nothing.

They do not MAKE you competant. They do not MAKE you have a calibrated meter. and they do not make you a good worker,a consciencious tradesperson, or a good business man,

All that comes from you.

What they give you is .... a badge, for £400 a year



Bayonet fixed

edit: they do not make you good at speeling either :goofy:
 
TELECTRIX,

Please can you explain how you do not need to be under a scheme to do EICR's.

I've worked for a firm since day 1 of my apprenticeship so obviously everything used to go through them so I am new to this side of things.

Thanks mate
 
There are no restrictions on who can carry out an EICR mate it's an opinion backed upby reference to the regs. If you have PI insurance you're good to go
 
Oh right I get you, so you do not have to go through LABC or anyone to inform them you have done an EICR?

Also, what certificates do you use? i.e where to get them from
 
I'm ELECSA registered and do not have my 2391. It just means that you can't register EICR's with them and probably don't have their support if something goes wrong. To do EIRC's you do need a very good knowledge of regulations and it helps to have a lot of experience but you do not need your 2391. You do however need calibration certificates for your meters at the annual inspection.
ELECSA have always been very helpful, good feedback from techinical support line on any type of question. I agree part p is flawed but it's the best we've got to weed out the cowboys. At least ELECSA act if notified that an approved sparky is dodgy or a client is specifying NICEIC when they should be saying 'approved'
 
I'm ELECSA and do EICR's as often as I win the contract for them. I'm not 2391 qualified. It helps to have a very good knowedge of the regs and alot of experience. Once you are ELECSA registered you can download and print all the forms you need for minor works, installation certs and EICR's. Their tech support is great and I've had no probs apart from late inspections. Part P isn't policed very well but it's the only tool we've got against the cowboy.
 
Cheers lads.

So what I could do is join elecsa as an installer to do installation work and remedial work as such, and do EIC'S through myself.

However, I may have an insurance company lined up who want me to do the EICR'S throughout the country but they may require 'branded' certs?

This would be something I would have to find out from them I guess.
 
Nope, disagree. The extra EICR inspection only allows you to log the tests and have them back you up. (as well as test your supposed supirior knowledg of the regs) I DO NOT pay for the extra EICR assesment and can still use downloaded ELECSA EICR forms.
 
Pass, Haven't come across that prob yet. they are still happy to discuss the odd 'I dunno whats the best course of action' problem. Presume it's best to be able to say that 'I'm tested by a governing body' if you end up in a court of law if someone get injured by an installation you've tested.
 
Agreed, it's stupid money and I don't feel the need to get ELECSA approved for EICR's (or 2391). A good working knowledge of the regs, lots of experience and a lot of common sense should suffice.
 
There are people about who have passed the 2391 with little or no practical experience of electrical installations - so I'd argue that having the 2391 isn't the only requirement for being competent.
 
The upshot of all this is.

It doensn't matter what you are inspecting, testing, designing, constructing, installing, in the Electrical world.
The simple fact of it all, is you DO NOT need any sort of qualification to be an Electrician, you DO NOT have to join any scheme. You DO however, need to prove competence, and work safely. I don't agree with all this, but it is the facts.

Don't believe me? then read through the EAW regs, there is no mention of qualifications, just "must be competent". It is the same in the BGB, competent person, skilled person and so on, its in definitions, and again, nowhere does it mention qualifications.


Cheers............Howard
 
There are people about who have passed the 2391 with little or no practical experience of electrical installations - so I'd argue that having the 2391 isn't the only requirement for being competent.
According to C&G info, to be eligible to take the 2391 course and exam you have to be a practicing electrician and actively involved in I&T. So it's not C&G at fault here it's the colleges who will let anyone on the course as long as they can pay the fee. For example, when I did it the second time there was a taxi driver on it who had been told all he needed was 2391 and he would be a spark. Surprisingly enough because of a lack of the basic knowledge he failed.
Taxi driver 0 College £300.
Jobs a goodun????
 
According to C&G info, to be eligible to take the 2391 course and exam you have to be a practicing electrician and actively involved in I&T. So it's not C&G at fault here it's the colleges who will let anyone on the course as long as they can pay the fee. For example, when I did it the second time there was a taxi driver on it who had been told all he needed was 2391 and he would be a spark. Surprisingly enough because of a lack of the basic knowledge he failed.
Taxi driver 0 College £300.
Jobs a goodun????

Trev,

You are not wrong, but that is just guidance. The minimum requirements to undertake 2391,2394, 2395 and 2396 is that you are 18 years or older.

Cheers.........Howard
 
Ok Howard I stand corrected but, as a college lecturer would you be happy taking a lesson full of lads who couldn't even change a plug top?
I know it's not down to you who gets admitted but I think that the guidance from C&G should sometimes be an instruction
 
Ok Howard I stand corrected but, as a college lecturer would you be happy taking a lesson full of lads who couldn't even change a plug top?
I know it's not down to you who gets admitted but I think that the guidance from C&G should sometimes be an instruction

Trev,

You are not corrected, you were right in the first place, that is their advice, All i was adding, was that the basic minimum requirement for C&G was a minimum age of 18, so if you are 18 you can do the course. And no i wouldnt let anyone on my courses without experience, it is hard work enough with very experienced people, let alone those with no knowledge. I vet all applicants anyway.

Cheers.........Howard
 
Trev,

You are not corrected, you were right in the first place, that is their advice, All i was adding, was that the basic minimum requirement for C&G was a minimum age of 18, so if you are 18 you can do the course. And no i wouldnt let anyone on my courses without experience, it is hard work enough with very experienced people, let alone those with no knowledge. I vet all applicants anyway.

Cheers.........Howard
Newcastle college actually have an entrance exam for their 2391 course, what a fantastic idea. Gets rid of chance your arm dafties who have no chance of passing and makes lecturers and students lives easier in the long run
 

Reply to Part p schemes in the Business Related area at ElectriciansForums.net

Similar Threads

Hi everyone, I recently moved out of my rented property, and as expected, my landlord is attempting to withhold a significant portion of my...
Replies
29
Views
2K
Hi all, I am going to fully rewire my house. What do I HAVE to do once I’ve rewired it? I am an approved spark, but do not have part P. Do I need...
Replies
11
Views
2K
Completed my AM2s start of this year. My whole career plan is to run my own company/sole trader. Be my own boss basically. I always get asked...
Replies
14
Views
804
Hello All, I did a 4 year apprenticeship, finishing in 1994 with C&G 236 parts 1 &2 with AM2. I worked for a few companies and then went in to the...
Replies
1
Views
895
Hi all, I am planning to install wall lights such as these ones (LAP Bronx Outdoor Up & Down Wall Light Black - Screwfix -...
Replies
5
Views
769

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock