Discuss Good Evening! in the The Welcome Forum area at ElectriciansForums.net

B

BeerSpark

First things first, I'm a time served Engineering Technician (multi-skilled maintenance - Electrical, instrumentation, PLC etc etc) not an electrician (I can hear the boo's and hisses already, haha!). A lot of my work is centred around RCM and a whole host of other modern maintenance/fault finding stuff that I shan't bore you with.

I have done 2382 and 2391 for ****s and giggles, but do very little installation work in my job. I've been lurking on here for a while, mainly for regs related stuff with regards to domestic installations, so thought it was time I signed up proper in order that I might doff my cap in the direction of the fine gentlemen whose advice I'm heeding!

As a side note, I've worked in a brewery for 18 years so if you have any beer related queries, that's something I can help with!

Cheers!
 
First things first, I'm a time served Engineering Technician (multi-skilled maintenance - Electrical, instrumentation, PLC etc etc) not an electrician (I can hear the boo's and hisses already, haha!). A lot of my work is centred around RCM and a whole host of other modern maintenance/fault finding stuff that I shan't bore you with.

I have done 2382 and 2391 for ****s and giggles, but do very little installation work in my job. I've been lurking on here for a while, mainly for regs related stuff with regards to domestic installations, so thought it was time I signed up proper in order that I might doff my cap in the direction of the fine gentlemen whose advice I'm heeding!

As a side note, I've worked in a brewery for 18 years so if you have any beer related queries, that's something I can help with!

Cheers!

Welcome bonny lad - you should fit in well here - most of this shower aren't electricians either!! :)
 
you might be able to help a wel respected member, MDJ. tell him the kind of shyte that goes into creamflow.
 
Cream flow? Nitrogen. Smaller bubbles.

Served so cold you can hardly taste it. Which, judging by the standard of most beers of that type, is no bad thing!
 
gave you your 1st thanks for that. it's what i ( as a pedigree, abbotts, hobgoblin,old peculier, etc. drinker) have been telling him for ages.
 
First things first, I'm a time served Engineering Technician (multi-skilled maintenance - Electrical, instrumentation, PLC etc etc) not an electrician (I can hear the boo's and hisses already, haha!). A lot of my work is centred around RCM and a whole host of other modern maintenance/fault finding stuff that I shan't bore you with.

I have done 2382 and 2391 for ****s and giggles, but do very little installation work in my job. I've been lurking on here for a while, mainly for regs related stuff with regards to domestic installations, so thought it was time I signed up proper in order that I might doff my cap in the direction of the fine gentlemen whose advice I'm heeding!

As a side note, I've worked in a brewery for 18 years so if you have any beer related queries, that's something I can help with!

Cheers!
Oh no, another wanabee Electrical Trainee
 
Haha! I knew I shouldn't have put that. I had hoped the 2391 might get me off the hook!

We have 15ww in my trade. Mostly from Toyota and mostly bloody dangerous! A little knowledge is a dangerous thing - and I bet you see that regularly on here!
 

Reply to Good Evening! in the The Welcome Forum area at ElectriciansForums.net

Similar Threads

Hello, I'm looking for any late-afternoon/ evening electrician's mate jobs, ideally in commercial/ industrial. I have the C&G 2365 Level 2 and...
Replies
0
Views
973
W
Good evening electricians! I'm after your expertise. Have just joined the forum today. A bit about myself, I currently have an NVQ 3 in...
Replies
5
Views
1K
Good evening gentlemen, some much needed advice is sought. I have spent the last 9 months exploring the finer arts of domestic EICR. This is as...
Replies
17
Views
3K
V
Hi all,my name is Vaughan and I`ve been an industrial control specialist for the last 16 years.I was a Ford trained Multiskilled Apprentice so as...
Replies
7
Views
1K
vaughant
V
Z
Hello everyone, Just thought I'd say hello.........and ask a quick question here as I am not sure where to ask this one.... I've been looking...
Replies
7
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock