Discuss Kit Car electronic Speedo Problem in the Auto Electrician Forum area at ElectriciansForums.net
thanks for the infoI would start by cleaning the prop flange including the extra lump that is used for pick-up. I would then check the gap is correct between the lump and sensor. If it still fails i would replace the sensor. Yes you should see an a/c signal but it can be tiny so you need a multimeter that measures mV or use a scope. The prop would need to be spinning to get a decent signal so be careful, lol
Reply to Kit Car electronic Speedo Problem in the Auto Electrician Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.