Robbiemikeyd
DIY
- Reaction score
- 2
So this is a question around my woodworking workshop. I have a dust collector which is connected up to various machines around the shop and want to be able to switch it on with a simple remote control I carry with me.
I purchased this relay from Amazon:
QIACHIP Universal Wireless Relay Module 12V 1CH Remote Control Light Switch Receiver RF 433 Mhz with 2 Smart Transmitters for Entrance Control, Car Light 164ft Long Range https://amzn.eu/d/iXQKYmE
As I understand it I believe I can use an old 12v adaptor linked up to the dc input.
And then rewire the dust collector power supply from the mains through the COM and NO.
I'd really appreciate it if someone can just check me on this, or tell me I'm way off the mark and go get learned.
I purchased this relay from Amazon:
QIACHIP Universal Wireless Relay Module 12V 1CH Remote Control Light Switch Receiver RF 433 Mhz with 2 Smart Transmitters for Entrance Control, Car Light 164ft Long Range https://amzn.eu/d/iXQKYmE
As I understand it I believe I can use an old 12v adaptor linked up to the dc input.
And then rewire the dust collector power supply from the mains through the COM and NO.
I'd really appreciate it if someone can just check me on this, or tell me I'm way off the mark and go get learned.
- TL;DR
- Just need some help checking my thinking in wiring up a relay with remote control, to power on and off dust collection system in my workshop.