attached image of a line i dug out to find feeding a 100Amp subpanel (25 years and no issues I'm told). I can't make it out and am hoping someone experienced might be able to identify it and confirm if it is indeed the right wire type to handle the load. It's a 100Amp main subpanel switch, with 80 Amps in switches on the board. Thanks for any help!
Discuss Can anyine identify this electrical line type and load rated for? in the DIY Electrical Advice area at ElectriciansForums.net
- Reaction score
- 1,665
Spins49 it looks to me like # 10 which is only good for 30 amps
Reply to Can anyine identify this electrical line type and load rated for? in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
Hello, I live in Mexico, where I have a small, un-official trailer park on my property.
The property is serviced by my privately owned, 650amp...
Reaching out for some help/guidance and sanity check. Apologies in advance for the long post, but wanted to make sure it was clear. Thanks in...
Hello, this is my first post here. I have a little experience with most types of household wiring through a decade of DIY remodeling, and...
Baja wiring harness LED light help.
I've fitted a US Baja harness on my Australian FJ, but I need to replace the Baja harness switch setup so...
Helloo guys,
First post, so sorry if this is dreary! I'll try keep it simple...
I have a client with a distribution circuit supplying AC...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.