The other option which nobody has mentioned so far is soldered or crimped joints with a liberal application of suitably rated heat shrink sleeving. Just a thought.
located in a suitable enclosure
Just finishing the sentence
Discuss Moving Consumer unit in the UK Electrical Forum area at ElectriciansForums.net
The other option which nobody has mentioned so far is soldered or crimped joints with a liberal application of suitably rated heat shrink sleeving. Just a thought.
Strain relief not needed if the cables are properly clipped/cleated.Would I be right in my thinking that the enclosure I've missed is to provide the required strain relief for the joint?
Would I be right in my thinking that the enclosure I've missed is to provide the required strain relief for the joint?
Not being a legal eagle,its never easy to put a definitive interpretation of the regulations that is agreed by all
My reason for not considering the ceiling an enclosure is that someone can access the void with no intention or expectation of it containing unprotected cables,an example being the connector blocks and tape used for fancy light fittings
With that I rest my case your honour
Reply to Moving Consumer unit in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.