Tool for 45 and 90 Degree Cuts on PVC Trunking

[RDB85]

I have bought a Mini Mitre Block for some Trunking as the cutters I have are better for Mini Trunking. I’m just looking for something that will allow me to mark the angle before cutting it. I was thinking either a Tri-Square or Trend ANGLEFIX. I then also need some advice on a file to smooth the edges down.

Any advice would be great.

 

[timhoward]

I actually use a chop saw, cowboy that I am. A cheap screwfix one is fine and just get a finer toothed blade for it. I’m expecting abuse for admitting this but it works for me!

 

[RDB85]

I actually use a chop saw, cowboy that I am. A cheap screwfix one is fine and just get a finer toothed blade for it. I’m expecting abuse for admitting this but it works for me!

I would love one. Just out of my budget unfortunately.

 

[nicebutdim]

Plastic trunking is best 'filed' with the edge of a knife

 

[RDB85]

Plastic trunking is best 'filed' with the edge of a knife

Oh right. I don’t think I would trust myself, hence why I was asking about a file.

 

[mattg4321]

Mitre box or chop saw for me.

 

[nicebutdim]

Oh right. I don’t think I would trust myself, hence why I was asking about a file.

Back of an old hacksaw blade would do just as well.

 

[RDB85]

Back of an old hacksaw blade would do just as well.

Thanks I will give that a try. Any mitre box recommendations before I order a cheap one and regret it.

 

[nicebutdim]

Thanks I will give that a try. Any mitre box recommendations before I order a cheap one and regret it.

Not suggesting they don't exist, but I'm yet to meet a mitre box I'd recommend.

 

[RDB85]

Would this be okay: Hultafors V20P 20cm Professional Try Square https://www.amazon.co.uk/dp/B004ZFE...abc_XJWG15XS9C0924YFTQ3H?_encoding=UTF8&psc=1

Or

Hultafors - Metric Rafter Square 18cm https://www.amazon.co.uk/dp/B089RW7HNF/ref=cm_sw_r_cp_api_glt_fabc_K5M9TS9PRZ02CH7VBFX0

 

[nicebutdim]

A square is a square, provided it's actually square, and will give you 90 or 45 degree angles.

 

[RDB85]

A square is a square, provided it's actually square, and will give you 90 or 45 degree angles.

That’s the problem some of the comments say they are fine. Others not so much.

 

[Jim_e_Jib]

That’s the problem some of the comments say they are fine. Others not so much.

If you are doing ultra fine woodwork then you'll probably notice if a square is fractionally out.


If you're chopping some plastic trunking, I wouldn't sweat it too much. Your technique with the saw will have a bigger impact on the final result than your set square being a quarter of a degree out.

Pick something reasonably priced from a brand you know and you'll be good to go. Don't overthink it.

 

[RDB85]

I think something such as this will do the job:

TREND DAR200 Digital Angle Rule, 20cm https://www.amazon.co.uk/dp/B003NKALBC/ref=cm_sw_r_cp_api_glt_fabc_2VQKA5NK24FR23ZXQ6MW

 

[loz2754]

Rolson 50858 Combination Square, 300 mm https://www.amazon.co.uk/dp/B004ST3ULA/ref=cm_sw_r_apan_glt_fabc_HQEF7NZK65JGYXG034V0

 

[Mike Johnson]

I used to use one of these: https://www.amazon.co.uk/Shears-Tru...able-Including/dp/B07SFTHVBV/ref=sr_1_2_sspa?

 

[nicebutdim]

I use a combination square from Screwfix that cost a fiver - freehand steel trunking cuts with grinder all butt neatly, so it must be alright.

 

[telectrix]

years ago, my dad wanted a mitre block. he made one from some scrap timber, similar to this:

 

[Dustydazzler]

If I had a job that required a lot of trunking to be cut then I might be tempted to buy a cheap chop saw...

Titan TTB795MSW 210mm Electric Single-Bevel Compound Mitre Saw 240V - Screwfix

Order online at Screwfix.com. Powerful compound mitre saw designed to produce precise cuts every time. Compact size and lightweight aluminium base for portability and comfortable use. FREE next day delivery available, free collection in 1 minute.

www.screwfix.com

But for a one off cut then a cheapo hacksaw and mitre box is fine

 

[RDB85]

If I had a job that required a lot of trunking to be cut then I might be tempted to buy a cheap chop saw...

Titan TTB795MSW 210mm Electric Single-Bevel Compound Mitre Saw 240V - Screwfix

Order online at Screwfix.com. Powerful compound mitre saw designed to produce precise cuts every time. Compact size and lightweight aluminium base for portability and comfortable use. FREE next day delivery available, free collection in 1 minute.

www.screwfix.com

But for a one off cut then a cheapo hacksaw and mitre box is fine

That does look okay to be honest. I am looking to buy this one:

Evolution R210SMS 210mm Electric Single-Bevel Sliding Multi-Material Mitre Saw 220-240V - Screwfix

Order online at Screwfix.com. Compound mitre saw complete with Evolution Rage multipurpose cutting technology. TCT blade can easily cut through wood, aluminium and mild steel, even if nails are still embedded in the material. The multipurpose blade cuts cleanly and leaves no burrs on steel...

www.screwfix.com