OP
Octopus
How much were you charged for the PIR and how long was the Electrician onsite for?
Discuss Code 1 Problems - Am I being Scammed? in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
did this guy have a blowlamp?
How much were you charged for the PIR and how long was the Electrician onsite for?
Just checked to see what that is and as far as I am aware no he did not.
charged £150 + VAT and he was there for about 1 hour.
dick turpin electrics? 1 hour is nowhere near long enough to carry out a PIR. as murdoch says. £150 is about right for 3 hours. i'd code 2 the cooker ignition if it was not fused down and also code 2 the 32A MCB, circuit 9, everything else .. code4. at £150/hour, i wouldn't get this guy back to do the remedials.
£800 + VAT for remedial works - does the quote/estimate give much detail as to what he/she would be doing??
tell him politely in 2 words, the 2nd word being "off". when you say you haven't paid him yet, have you not paid him for the "report"? if not, i'd query the £150 for an hour's work.
Reply to Code 1 Problems - Am I being Scammed? in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.