N
nickblake
Well thought id give my Opinion on these boards ,and using them i have found them in all honesty to be very good ,they do look stylish ,and modern , the board is made of a quite strong plastic MCB's drop in nicely with the entrance holes being adequate there is plenty of space for wiring after a minor adjustent of the internal wiring RCD trip at i reasonable speed and ramp at 24ma , lables are available for most circuits although i would have liked a few more sockets and lights , one problem i did have was the screws were quite tight to undo on the Neutral and earth bus bars , Technical were very helpful as i enquired about the torque settings these are 1.8nm by the way ,and for the money ÂŁ50 fully loaded with spare MCB's at ÂŁ3.50 and RCBO's at ÂŁ15.00 a very good board for the money Perfect for house holds on a low budget or rented accomadation so out of 10 i would happily give these boards for the budget range an 8 out of 10 when comared to boards of the same price range they come top of my list , pic of the board below wiring a bit untidy on this one