Door access control kit & Wiring

[Ldix32]

Hi all,

Currently wiring 3 new flats and have questions about the door access. Theres one main door to the flats which will have an intercom outside aswell as a keypad w/proximity tags to unlock the door. Ive never installed or wired door access before and have been looking online at door access kits and found a kit on TLC :

EZTAG3 Pro Access Control Kit Silver - IP65 c/w Proximity Tags and Mag Lock | ESP (EZTAG3PRO) - https://www.tlc-direct.co.uk/Products/EZTAG3PRO.html?source=adwords&ad_position=&ad_id=415703895099&placement=&kw=&network=u&matchtype=&ad_type=&product_id=EZTAG3PRO&product_partition_id=940253953918&campaign=shopping_excluded&version=finalurl_v3&gclid=CjwKCAjwnZaVBhA6EiwAVVyv9AiHy35qwa6bDdPOWUR-KUczO4JC_58q3301HZJGd_U89TVeDY67VhoClK0QAvD_BwE


Would i need anything else with that kit or is everything i need in there? Also the door has to be linked to the fire alarm so in the event of a fire the alarm sounding would release the door, Do i need a separate fire relay for that to work or do most modern fire control panels have that relay already inside them for the purpose of opening the door in event of the fire alarm sounding?

Any advice is appreciated.

 

[Yozza19]

Most fire alarms have fire relay built in some will need to be set up on effects

 

[Iguula]

You can wire the fire panel relay on to the PB terminal of that reader.
It will cut the power to the ML when there's a signal send by the Fire panel.