Discuss Megger Mft 1552 in the UK Electrical Forum area at ElectriciansForums.net

S

stuartgil

Just managed to bag myself a great deal on a second hand mft 1552, Won it for £300 on ebay although no calibration cert, every other test lead is included in the sale plus the charging unit and batteries. The guy told me that getting the unit calibrated is expensive and to register myself against the machine instead, tbh I'm at a bit of a lose, I thought calibration is around 60-100 mark! :willy_nilly:
 
cheers glenn and jay, I will replace all leads if needs be, would a local electrical supplier do the calibration or do I need to look on line? thanks for advice once again.
 
cheers glenn and jay, I will replace all leads if needs be, would a local electrical supplier do the calibration or do I need to look on line? thanks for advice once again.
go for value for money....good callibration houses will allow 24 hours in a climate controlled room for instruments to `normalise` before puttin em on the rig....
which begs me to ask why my part pis assessor tried offering me `callibration` out of the back of his car....
 
loads of calibration services around. wholesalers occasionally have cal. days where it's discounted. at a losss where you say batteries and charging unit are inc. as megger advise not to use rechargeable batts.
 
loads of calibration services around. wholesalers occasionally have cal. days where it's discounted. at a losss where you say batteries and charging unit are inc. as megger advise not to use rechargeable batts.

Quite right tel, the 1730 is rechargeable I believe, definitely not the 1552 as you rightly mentioned.
 

Reply to Megger Mft 1552 in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I have a nice new KT66DL MFT and a spare fluke. The KT64DL is now surplus to requirements and going to off load it. Before going through all the...
Replies
2
Views
1K
Hi, just got a bit of a shock this morning, turns out my Megger has failed calibration and needs to go back to Megger for a "fixed price" repair...
Replies
23
Views
8K
i have seen on ebay an advert for calibration of equipment, with a turn around time of 48hours after receiving your tester. for a total £35...
Replies
2
Views
2K
J
I recently bought a megger 1730 and i`m getting some weird earth loop readings using the no trip function. I know they can be a little higher at...
Replies
2
Views
2K
N
Megger MFT 1552 multifunction tester for sale mint condition , this was a spare unit so original cal has ran out virtually unused ,lead set has...
Replies
3
Views
2K
chrisgc
C

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock