- Reaction score
- 747
Brian, I wouldn't hold your breath.
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss Metrel EurotestAT 3101 AM3 Firmware in the Electrical Tools and Products area at ElectriciansForums.net
Share this page
OP
Octopus
Thing is that I've had my Eurotest AT for nearly 6 years - its NOT ACCEPTABLE for the OEM not to be able to update it.
- Reaction score
- 747
Especially when it was advertised as 'future proofed' for changes to the regs!
Reply to Metrel EurotestAT 3101 AM3 Firmware in the Electrical Tools and Products area at ElectriciansForums.net
Share this page
Similar Threads
Hello all, I've just been perusing the AM2/E/S threads on here. Thought you might like a bit of a review.
If, like I did, you find yourself...
Edited - please read right to the end!
Grateful for any advice regarding CT metering which seems to be generating inaccurate/implausible...
Here we go again once again we can be found having to prepare for an inspection visit by the governing body and as usual we are issued with a list...
Hi folks,
I passed my C&G Portable Appliance testing today. Another string to the bow so to speak. I Have only ever done appliance testing as an...
HI, i have just bought a Metrel EurotestAT 3101 secondhand and its a great bit of kit apart from sometimes i get ocasional crazy low ohm readings...
Electricians Tools | Electrical Tools and Products
Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.
We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Need Help with wiring circuit for lightsGood Morning need some advice please. Yesterday went to change a light fitting in hallway. There...
- Latest: noexpert
-
Fuel Gauge needle moving with revs issueThe link you posted is for a regulator/rectifier. Do you mean I should somehow hook it up as per...
- Latest: Tarlow
-
Uh oh...shorted MICC. How scr*wed am I?yes. I was just clarifying what Dave meant by "isolate"
- Latest: johnnyuk
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.