-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Given the RCD pictured below
With the manufacturers instructions here:
Am i right in interpreting that as well as being able to bring the...
I have a Garo Entity Pro and my phone cannot find the Garo-CU to connect my wifi to the Garo app so at the moment it is charging at 16A and I...
The oven locked itself and the door so I had to turn off the power and can now open it again. Only thing is the oven is no longer heating up at...
Does a SPD need a dedicated way?
I need an extra way in this unit for a 3 phase car charger
As you can see its a small unit with no extra...
I seem to remeber being taught /told that when doing an eicr you should test when possible to the regs that applied at the time of installation...
I've just been fettling some 50 year old 2L2.5 pyro (MICC) to relocate a plug socket. I probably bent the cable a little more than I should have...
- Sticky
- Article
We have this thread on TilersForums.com and it's just been restarted because the old thread had 20,000 replies and 500,000 views. And there were...
- Article
Electrical2Go - Choosing the Right Cooling Fans - All You Need to Know
We understand that choosing the right cooling fan can be overwhelming...
Hi all I have an outdoor wall light which is bolted from behind. Then a decorative nut threaded on the front.
As I push the plate on the bolt...
Hi guys & gals,
I gave in and bought the new Megger MFT-X1. Got my hands on it Friday night, had a little play with it, used it at work on Monday...
Hi all
I am after some advice on an installation I have coming up.
Its a new TP+N circuit in SWA (13m run clipped direct) for a 22kW Tesla wall...
Quick question here.
Have recently completed my level2 2365, and have an interview at a college locally for a advanced apprenticeship. It will...
Hi all,
I'm struggling with these questions for this circuit as the equations I have in order to work out impedance etc all seem to need the...
In preparation for an EVSE installation, I am running the supply cable from the main CU, via catenary, to a new CU in my garage.
The cable is 6mm...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Type S RCD Polarity ClarificationYour drawing suggests that you might be modifying the DB beyond the manufacturer's design...
- Latest: GroovyG
-
Garo Entity ProThe Garo installation manual implies both the 'owner' and 'installer' need the app to complete...
- Latest: Avo Mk8
-
Indesit oven error F53 code / no longer heating upDid you turn off the power to the oven for a long time? Comments on the web suggest that a...
- Latest: Avo Mk8
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.