HI, I ve briefly asked about this setup before but now asking about the load on 4 way...... is this Ok/Safe ?
I have a plastic 10 way CU.....one of the 50A MCBs from this has been used to feed the new 4 WAY metal CU.
The new 4 way METAL CU has an 80A main switch (30Ma) and 4 MCB's (50a,32a,32a 6a)
With 4 way metal CU being fed from a 50A MCB from the plastic 10 way CU, is it safe to have a 50A shower and 2x32A ring mains and a lighting circuit running on the 4 way ...all being fed from a 50A MCB ????
I have a plastic 10 way CU.....one of the 50A MCBs from this has been used to feed the new 4 WAY metal CU.
The new 4 way METAL CU has an 80A main switch (30Ma) and 4 MCB's (50a,32a,32a 6a)
With 4 way metal CU being fed from a 50A MCB from the plastic 10 way CU, is it safe to have a 50A shower and 2x32A ring mains and a lighting circuit running on the 4 way ...all being fed from a 50A MCB ????
Last edited by a moderator: