FOR SALE. Isolators and RCBO's

[normanton]

Hi everyone. I have the following items for sale that I can't seem to shift on eBay. I'm sure they will be of use to some of you gentlemen.

20 x 100A Double pole Isolators complete with enclosure and 6mm tails (Deopke)
20 x 6A 30m/A RCBO
20 x 25A 30m/A RCCB

£10 each or you can have the lot for £300.

 

[normanton]

Sorry should have stated. RCBO's and RCCB's are also Doepke

 

[ChrisElectrical88]

Doekpe?

 

[normanton]

The manufacturer is Doepke sorry

 

[telectrix]

what boards that we've heard of do dopey RCBOs fit

 

[normanton]

Let me get back to you on that. I'll have a trial tomorrow lol

 

[normanton]

Done some research . They are compatible with Wylex, Square D, Volex and Hagar.

 

[telectrix]

could fit 'em in a proteus board. anything fitted in 1 of them would be an improvement.

 

[telectrix]

just a thought on MCBs in general. why can't the manufacturers fit the retaining clip at the top instead of the bottom. then we wouldn't have to drop the busbar to replace 1 poxy MCB.

 

[normanton]

My thoughts exactly. It's like they go out of their way to make your job more difficult

 

[MDJ]

You need to be careful selling second hand Breakers, RCDs or RCBOs fella, warrenty issues for one and what if a member of the public bought one and the house burned down? a can of worms.

 

[i=p/u]

Typical of you mike, always see the worst. What adding your experience to my ups post. Morning

 

[MDJ]

Typical of you mike, always see the worst. What adding your experience to my ups post. Morning

Only trying to be friendly and warn a fellow it could be dangerous lol

 

[i=p/u]

Nothing beats buying new materials especially since they paying for it. One less thing to worry about if it plays up. And you won't kick yourself just the guy behind counter at wholesalers ..

 

[MDJ]

Typical of you mike, always see the worst. What adding your experience to my ups post. Morning

Providing you ensure the ups equipment is isolated on both poles treat the sockets like an ordinary circuit, I would avoid an IR test and use the low loop test as you would when testing a circuit with an RCD on it.

 

[MDJ]

Got to go to work now, later fella

 

[normanton]

Sorry I should have stated. They're not second hand. All brand new, just te company ordered too many so it's just switchgear that was left on site.

 

[i=p/u]

I think they use that brand in Cambodia ???? It's the brand not the product they want says Hilary .