This is a 2/0 CU Feeder wire coming into the main subpanel on a 200A service. There are no nicks in the copper wire and from the front side...
Hi,
Currently working my way through my NVQ portfolio (Nearing Completion) but getting stuck on how to complete the following criteria due to...
- Sticky
- Article
We have this thread on TilersForums.com and it's just been restarted because the old thread had 20,000 replies and 500,000 views. And there were...
Bit of a rant first to explain the situation:-
Effing builders again, I knew there was a reason we hardly ever work for them. We've done a few...
Question is does this DB really need RCD protection as there are only internal lights and sockets supplying this large building that used to be a...
No waffling, going to get straight to the point. Main water on the exterior of the building in plastic. Changes to copper inside the building...
Hi, just seeing if anyone has done the unit 203 exam and has any tips.
Thanks
Hi,
The wire of my dehumdifier is broken (Meaco 20L Low Energy). The wire was being pulled over a period of time, which seems to have lead to a...
Just to be clear… I am going to do the correct thing here and pay for the correct parts…. I just wanted to start the discussion.
My particular...
DIY here with no electrical experience. I would like to use a guitar amplifier (Positive Grid Spark 40w) to push a pair of bookshelf speakers that...
Hey guys this is my first post on this site. Just got my design project It's a swimming pool hotel and cafe. I haven't got a clue where to begin...
Hello everyone,
Hope you're all well.
I'm carrying out an overall/global insulation resistance test on a newly wired 3 phase installation we did...
I am trying to understand how a relay system works and have designed a circuit and a ladder diagram all as attached for an 8 PIN relay, a current...
I have a medical problem. I can't stop buying tools.
If I see a well engineered or well manufactured tool I can't help buying it.
It doesn't...
Hi everyone,
On a job at the moment and trying to
Work out cable size needed for property supply. Lots going on and struggle to work out...
As the title say, is the CK T3678 worth getting for a modest amount of work cutting stuff like 50mm hard-drawn copper, and maybe up to 120mm soft...
I disassembled a Christmas light projector to try and identify the cause of why the images from the projector weren't moving at all, when they...
A house we have just re-wired has one of these cooker points,
Trouble is the kitchen wasn't supposed to have been touched by any trade but...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.