-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Questions and electrical advice in the Electrical Forum Canada - Canada Electricians Forums > Electrical Forum for Canada Electrical Rules, Regulations and Canadian State Laws. Electrical Theories, Wiring Diagrams and More. DIY and Professional Electricians are Welcome..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrical Jobs
The Bar - CANADIANS ONLY
The Bar - Canadians Only ACCESS ONLY AREA
- Threads
- 0
- Messages
- 0
- Views
- 0
None
Hey guys, first post here so please go easy :)
Iv just started this job, helping a mate of mine, whose mate has brought a unit that needs...
lads i av been asked to provide a 3 phase supply for a small commercial oven. 9.5kw 10kw and 9kw. what cable size is required. i calculated 33...
i connected a single phase bandsaw yesterday
i noticed that the kickstop and the 2 safety door switches are wired in the neutral conductor
the...
Hi guys, I may sound like a bit of a thicko but I am puzzled by something at the mo. I am installing a 7.5kW 3P balanced submersible pump in a...
How do you form steel trunking and tray to follow the contours of a circular room ,i.e in a circle.
The trunking and tray will be suspended from...
Hi all
Had a phone call today asking if I would have a look at a milling machine that had been switched off last night and wouldnt power back up...
Hi,
I am looking for some info on a project that I am going to carry out at work in the near future. It's good idea in theory, but i'm afraid...
Anyone seen a joint like this before? I certainly haven't.
400mm 3core going into it. 6 x 630mm singles coming out (2 per phase) @11kv
Found a...
Hi Guys,
I work for a large food factory, a couple of days ago a chap was electrocuted from a machine that had a bonding issue. Now we are being...
Have been looking at a situation where a 400 amp MCCB is feeding a ups. There is a mains supply to a genny changeover switch, along with the genny...
hi, just looking for some help on how to install the main bonding on a large industrial building.
Firstly the supply neutral to the building is...
Evening guys.
Right, got a bit of a problem. The father in law sprung it on me yesterday to wire up his Turkey zapper which he needs for...
I am fully qualified and registered with napit, i am going to have some training on how to install fire alarm, but someone told me that only...
Looked at a DB yesterday and noticed that all 8 circuits were using the armour as the CPC, but the banjos at the DB end were just screwed into the...
Hey Everyone.
Im designing a product that has an analog electrical system in which i have multiple fans.
im thinking of using a Reed switch to let...
bit of advice plz guys... im working in a hospital decontamination room. there will be four big sterilising machines to clean endoscopy...
As working in the industrial side of electrics, I find it hard doing the work for the first time without actually knowing what it should look...
Hey guys,
Can someone help me get my head around breaking three phase down into three seperate circuits please.
If i wanted to break down a...
Hi
Had a phone call to go and look at moving a 44kva 3 phase generator on a farm. Im going to have to resupply it in swa. I havent done any work...
Hi Guys,
Had a look at a job today and need some help, the shop has three roller shutters all going to seperate up/down switches (NEXT TO EACH...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Australia Help with wiring of relay for automotive spot lightsI do not believe they are dimmable, therefore if we can include the schematic to cut the DRL...
- Latest: MasterB1aster
-
Electrical Layout diagramsThis is a bit of an old thread so I'd guess the people asking questions already found their...- Latest: Marvo
-
COMMTEST VB7 Condition Monitors (BIN2.2.1)COMMTEST VB7 Condition Monitors Doesn't come power cord and any other leads and i am selling for...
- Latest: britowaves
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.